Two-part epoxy putty stick that bonds ,seals ,leaks and repairs ,gouges in steel ,aluminum ,wood ,fiberglass,concrete and ceramics. Cures rock hard in minutes . bonds well into wet surfaces.Can be painted ,sanded , machined, tapped,or drilled when fully cured up to 24 hours.
Directions:
·Use gloves if you find skin sensitivity
·For best results,clean and de-grease surfaces,then roughen bond area prior to application .
Twist or cut off required amount . Smaller amounts of putty used and lower temperatures will lengthen hardening and cure times .
·To mix , knead thoroughly with fingers to a uniform color(average mixing time is 2 minutes).A quick way to knead the putty is on a hard ,clean surface. If tacky on hand ,wet hand sligtly.
·Apply to surface to be repaired(within two minutes of mixing).The mixed epoxy does not exhibit high bond strength at this point but appears to be merely lying on the surface . Force into any cracks or holes to be filled and strike off excess material .On painted surface ,the bond can only be as strong as the paint bond itself
·When applying to damp,wet or slowly leaking area ,work the material forcefully into the surface and apply pressure until adhesion begins to take effect.
·For a smooth appearance of the cured compound ,hand rub with water or a damp cloth prior to hardening .Remove excess material before hardening begins .Once hardening begins , do not handle or reposition
·After 30-40 minutes the epoxy will harden and form a tenacious bond.
After just 60 minutes many items are able to be put back into service.
·Because the storage , handling and application of this material are beyond our control ,we can accept no liability for the result obtained.